| 25 |
Motor overload. Please check if bowl contents block knife. |
Please check if the content of the bowl blocks the knife. If this is the case, carefully remove the food that blocks it. Reduce the quantity of ingredients inside the bowl. If the error persists, please contact customer service. |
| 29 |
Motor is too hot. Wait until the motor has cooled down. Please check the air vents at the bottom and the back of the appliance. Please clean the protection grids. |
Please allow your TM to cool down. Make sure the air vents are not blocked and the protection grid is clean. If the error persists, please contact customer service. |
| 34 |
Motor overload. Please check if bowl contents block knife. |
Please check if the content of the bowl blocks the knife. If this is the case, carefully remove the food that blocks it. Reduce the quantity of ingredients inside the bowl. If the error persists, please contact customer service. |
| 52 |
Please clean contact pins on bowl base. |
Please clean the contact pins on the base of your TM bowl and dry them. If the error persists, please contact customer service. |
| 140 |
Mixing bowl not in position. Place mixing bowl into correct position. |
Please switch off your Thermomix®. Clean and dry the pins on the bottom of the bowl. Place the bowl in the right position. Restart your Thermomix®. If the error persists, please contact customer care. |
| 144 |
Motor overload. Please check if bowl contents block knife. |
Please check if the content of the bowl blocks the knife. If this is the case, carefully remove the food that blocks it. Reduce the quantity of ingredients inside the bowl. If the error persists, please contact customer service. |
| 145 |
Overload protection activated. |
Please remove some ingredients and try again. If the error persists, please contact customer service. |
| 147 |
Speed selector is defective. |
Please contact customer service. |
| 151 |
Mixing bowl not in position. Place mixing bowl into correct position. |
Please switch off your Thermomix®. Clean and dry the pins on the bottom of the bowl. Place the bowl in the right position. Restart your Thermomix®. If the error persists, please contact customer care. |
| 160 |
Appliance too hot. Please wait until it cools down. |
Wait until your Thermomix® has cooled down. Make sure that the ventilation openings are not blocked. |
| 170 |
Appliance has detected too much heat. |
Switch off your Thermomix® and allow it to cool down. Then restart it. If the error persists, please contact customer service. |
| 212 |
Please remove Varoma® and simmering basket. |
For safety reasons, remove accessories such as the Varoma® or simmering basket before proceeding. If the message persists, please contact customer care. |
| 311 |
Cover not closed properly. |
Ensure that the mixing bowl lid is correctly closed and that the safety locking arms are in place. If the issue persists, restart the device. |
| 420 |
Scale not stable. Please wait. |
Wait until the scale stabilizes before continuing. Avoid touching or moving the Thermomix® while weighing. |
| 521 |
Scale not available. |
Restart your Thermomix®. Ensure it is on a level, stable surface. If the problem continues, please contact customer service. |
| 626 |
Too much weight on scale. |
Remove excess weight. The Thermomix® can weigh up to 3 kg in total. Restart the scale function if needed. |
| 650 |
Temperature sensor not functioning properly. |
Switch off the Thermomix® and restart it. If the message continues to appear, contact customer service. |
| 701 |
Software update required. |
Ensure your Thermomix® is connected to Wi-Fi and install the latest software version. |
| 802 |
Safety system activated. |
Switch off the appliance and restart. If the issue persists, contact customer service. |
